Attention: for urgent orders please contact us directly by phone. Tel: +49 7393 / 918 39 10
The company haid-tec from Rottenacker, Germany was the first to implement these newly developed pads as a cleaning solution for porcelain stoneware. Here the challenge was to remove a layer of grey fog, that had formed on the surface of the porcelain stoneware flooring, particularly as a result of using inappropriate cleaning products.
The OE pad is only 15 mm thick to allow the high-frequency vibrations from the machine’s vibrating plate to be transferred directly to the floor. The pad can only remove dirt when the vibrations are transferred to the floor.
The vibrations must not “escape” via the back or the foam of the pad – otherwise the pad will remain motionless and have no impact on the floor.
Introduced at CMS Berlin 2019, our innovative MPP OE is composed of premium composite foam made from melamine resin with a firmly-attached Velcro back that is ideal for transferring the machine’s high-frequency vibrations. After use, the Velcro back comes off easily without leaving fibers on the Velcro hooks of the vibrating plate.
The more slowly and frequently the floor is covered by the cleaning machine, and the higher its contact pressure, the better the cleaning performance.
There have been many years of experience using them to clean mineral floor coverings, porcelain stoneware tiles, natural stone, artificial stone and structured surfaces.
Basic pads were developed for use with single-disc machines, and therefore, without an opening in the foam.
Standard pads are pads for scrubber-driers, and therefore, have an opening in the foam for mounting in the pad holder with centerlock. In daily maintenance cleaning, the motor head of the machine is moved up and down many times. Therefore, we recommend using pad holders with centerlock, which ensure proper hold of the pad.
The more slowly and frequently the floor is covered by the cleaning machine, and the higher its contact pressure, the better the cleaning performance.